• Bird House

    Comments (-1)
  • Cutting Board

    Comments (-1)
  • Pen

    Comments (-1)
  • Sign

    Sign Plan of Procedures

    1)      Draw 6 or more thumbnail sketches.

    2)      Draw 2 different full size sets of plans with dimensions.

    3)      Select stock(5 ½” x 12”)

    4)      Find the center width and length (corner to corner 3’ bench rule)

    5)      Layout edge as per plans.

    6)      Layout Design. (leave ½” border, check with instructor)

    7)      Router out letters. (router, ¼” bit)

    8)      Cut out edge design, leave the line. (coping saw, C-clamp)

    9)      File edges to the line.(Files, File card and brush)

    Drill the mounting holes. (1/8 twist drill bit, Power hand drill) 

    10) Spray paint design. ( read instructions on can)

    11) Plane off excess paint.(surface planner)

    12) Router edges.(edge router, Left to Right)

    13) Sand.

    14) Stamp name and date into the back.

    1 F Final sand by hand.(220 grit sand paper)

    17) Fill out grading sheet.

    Comments (-1)